|
|
|
|
|
|
|
|
|
|
|
|
|
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware T Hinge, Flush/Full Inset, Light, Series: 284BC, 6 Holes, 0.21 in Hole Diameter, 0.056 in Leaf Thickness, 3 in Door Leaf Length, 0.69 in Frame Leaf Length, 2.24 in Frame Leaf Width, 0.17 in Diameter Pin, Aluminum Pin, Wall Mounting, Fasteners: NO 6 Flat Headed Screw, 18 lb Load Capacity, 2.34 in Overall Width, Hot Rolled Steel
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
518. Swaged for mortise installations. Manufactured from cold-rolled steel, with non-removable steel pin. Tight pin to allow for left or right hand applications. Boxed loose.
|
2.2mm thickness, 5-knuckle, loose pin.
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
|
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3 in Door Leaf Length, 3 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
Heavy-gauge cold-rolled steel for added strength. Flush pin for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation. Screws included.
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-gauge cold-rolled steel for added strength. Nib on hinge for finished appearance. Five knuckle, full mortise design. Screw holes are countersunk. Removable pin for easier installation or removal of doors.
|
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Boxed loose.
|
Offset screw holes for extra strength and to prevent wood from splitting. Tight pin for left or right hand applications. Steel with aluminum pin. Safe working load: 18 lbs. Visual-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.2mm thickness, 5-knuckle, loose pin.
|
504. Designed for general utility and industrial applications. Hinges are swaged for mortise installations. Loose pin allows doors to be removed without taking off hinges. Plain steel version can be welded. Boxed.
|
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512R5/8, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Door Hinge, Full Mortise, Round Corner, Series: SPB512RC, Knuckle Bearing, 6 Holes, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
National Hardware Door Hinge, Full Mortise, Square Corner, Series: SPB512, Knuckle Bearing, 3-1/2 in Door Leaf Length, 3-1/2 in Frame Leaf Length, Non-Rising, Removable Pin, Fasteners: (5) Knuckles, Screws, 50 lb Load Capacity, 3-1/2 in Overall Width, Steel, Brass Tone, BHMA A138.18, For Interior Residential Doors
|
505. Swaged for mortise installations. Manufactured with cold rolled steel. Five knuckle, full mortise design. Riveted, non-removable pin. Boxed loose barcoded.
|
|
|
